DuraLabel 9000 Uživatelská příručka stáhnout pdf (Strana 45)

3.5 Service

Service

Initialization Mileage Info. Exit

This feature is used to restore printer settings to defaults and display printer mileage

information.

3.5.1 Initialization

Service 1/3 Initialization Initializing ...

> Initialization

Mileage Info. SELECT YES

Exit MENU NO

The printer settings are restored to defaults as below once printer is initialized.

Note : When printer initialization is done, please calibrate the gap or black-mark

sensor before printing supplies with gap or black-mark sensor.

Parameter Default setting

Speed

2 IPS (50.8 mm/sec)

Density

5.0

Label width

9"(219.5mm)

Label length

15"(101.6mm)

Sensor type

Gap sensor

Gap setting

0.12"(3.0mm)

Print direction

Reference point

0,0(upper left corner)

Offset

Print mode

Batch mode

Serial port settings

9600 bps, none parity, 8 data bits, 1 stop bit

Code page

850

Country code

001

Clear flash memory

Shift X

Shift Y

Gap sensor sensitivity

3 (Will be reset. Need to re-calibrate the gap)

Bline sensor sensitivity

2 (Will be reset. Need to re-calibrate the gap)

Language

English

IP address

DHCP

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52 53

Komentáře k této Příručce

Žádné komentáře

DuraLabel 9000 Uživatelská příručka Strana 45

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování DuraLabel 9000